The M8 nut has a diameter of 13 millimeters and is typically used on bolts. Its thread pitch is 1.25 mm, and the length is 20 millimeters. The M8 nut has two threads in one direction. The diameter of the metric M bolt is 8mm and the width is 13 millimeters. Its size is a standard measurement for most fasteners.
Height of hex nut
The height of the hex nut depends on the type of threading. A 6.75mm diameter hole is necessary for a 1.25mm coarse thread pitch, while a 7.25mm diameter hole will work for M8 nuts. The threading type of M8 hex nut can vary significantly in its height, so it is best to check the specs before you order a nut for a project.
The M8 nut is a standard metric hex nut with a diameter of 8mm. Its height varies depending on the type of threading. Normally, the M8 hex nut has a diameter of 13mm on each side. Moreover, the height varies according to the thickness of the threads. This size is equivalent to about 80% of the nominal diameter of a screw.
The M8 nut is a metric hex nut. Its normal height is 13mm on both sides. The M8 hex nut is about 80% of the nominal diameter of the screw. Its threads are defined with the distance between the threads. The M8 hex ring is about 6mm long and 8mm wide. The length of the threaded nut is about 80mm.
The M8 nut is a standard size. A metric fastener is the same size as an American bolt. In the US, an M8 nut is slightly bigger and will fit a 3/8-inch-diameter screw. M8 nuts are usually referred to by 'M' sizes. The nut's diameter, pitch, and length are all important and are often given in the same manner.
Choosing the best nut
When choosing a nut, make sure that the size you select matches the purpose for which you are using it. The M8 nut is a universal nut. The UNC nut has a diameter of eight millimeters, and an m8 hex nut has a diameter of four millimeters. In addition to metric and imperial hexagon hex nuts, you can also find UNC and UNF versions of the M8 nut.
コメント